One Year Warranty
Axis Telesolutions Inc. offers a variety of warranty options. The one year warranty is an advance replacement warranty protecting against manufacturer defects. You will feel confident in knowing your equipment is backed by a leader in the telecommunication industry.
IP Office Release 1.3
IP 401 Compact Office Platform
IP Office Release 1.3 Installation Manaul
The IP401 Compact Office system platform is supplied in two variants:
IP401 Compact Office 2 supports: Two digital and two analog telephones A BRI ISDN port (2 trunks) An four port auto-negotiating 10/100 BaseT LAN hub IP401 Compact Office 4 supports: Four digital and four analog telephones Two BRI ISDN ports (4 trunks) An eight port auto-negotiating 10/100 BaseT LAN hub.
The auto-negotiating 10/100 BaseT LAN hub provides access to networks and/or up to eight IP telephones.
The DT ports support Avaya 2000 series telephones. DT ports are set to A-Law PCM encoding at default but can be programmed to μ-Law PCM encoding.
An IP401 Compact Office 2 can be expanded to an IP401 Compact Office 4.
In addition the IP401 Compact Office can be fitted with any of the following optional Integral Modules:
- WAN Port This port supports a single synchronous data connection, which can be X.21, V.35 or V.24.
- Voice Compression Module (VCM) Supports VoIP applications (over two channels) using Avaya 4600 IP telephone connected via LAN ports.
- VME card Provides memory capacity for embedded voice mail feature.
IP 403 Office Platform
The IP403 Office system platform supports up to eight digital and two analog telephones. This can be expanded, by use of extension modules, to 100 extensions. Two variants are available and are equipped as follows:
- DT ports - Support Avaya 2000 series telephones.
- DS ports - Support Avaya 6400 and/or Avaya 4400 series telephones.
Both ports can be set for either μ-Law or A-Law PCM encoding. At default DT ports are set to A-Law and DS ports are set to μ-Law. However, these can be switched in software (refer to the Administration Manager Manual for details). Connection to trunks is via one* of the following integral interface modules:- Single PRI E1 (30 trunks) or Single PRI T1 (23B+1D or 24B trunks - USA only) or Quad BRI (8 trunks) or Analog 4 (loop start trunks ). If Analog 4 modules are used, a second module can be fitted in Slot A.
An eight port auto-negotiating 10/100 BaseT LAN hub provides access to networks and/or up to eight IP telephones.
IP406 Office Platform
The IP406 Office system platform supports up to 180 extensions. Connection to trunks is via any two of the following integral interface modules as follows:- - Single PRI E1/PRI E1-R2 (30 trunks) or - Single PRI T1 (23B+1D or 24B trunks - USA only) or - Quad BRI (8 trunks) or - Analog 4 (loop start).
An eight port auto-negotiating 10/100 BaseT LAN hub provides access to networks and/or up to eight IP telephones. (Where IP telephones are to be used a suitable switch, e.g. an Avaya Cajun P130, should be used)
IP412 Office Platform
The IP412 Office system platform supports up to 256 extensions. Connection to trunks is via a combination of any of the following integral interface modules :- - Single or Dual PRI E1/PRIE1-R2 (30 or 60 trunks respectively) - Single or Dual PRI T1 (24 or 48 trunks respectively - USA only) - Quad BRI (8 trunks) - Analog 4 (4 loop start trunks)
Dual independent auto-negotiating 10/100 BaseT Ethernet ports provide segmented access (allows a firewall break to be used) to the LAN. (Where IP telephones are to be used a suitable switch, e.g. an Avaya Cajun P130, must be used.)