One Year Warranty
Axis Telesolutions Inc. offers a variety of warranty options. The one year warranty is an advance replacement warranty protecting against manufacturer defects. You will feel confident in knowing your equipment is backed by a leader in the telecommunication industry.
IP400 Base,Trunk & Expansion
IP Office - Small Office Edition WAN Expansion Interfaces
All IP Office - Small Office Edition variants provide an expansion slot for an optional WAN interface of the following types (check locally for availability).
IP400 WAN Expansion
The IP400 WAN Expansion card provides a single WAN connection (X21, V24 or V35 via a 37-way D Type socket). Line speeds up to and including 2Mbps are supported on the interface. The carrier providing the line dictates the actual operating speed, i.e. in some territories the maximum speed may be 1.544M.
IP400 Office BRI Card
The BRI trunk card provides 4 Basic Rate ISDN T interfaces (8 trunks). Details of the supported ISDN supplementary services on BRI interfaces are given in the 'Public and Private Voice Networks' section.
IP400 Office PRI Cards (T1/E1/E1R2)
Available in single and dual versions the IP400 Office PRI card provides single and dual primary rate trunk interfaces respectively. The PRI is available as either T1, E1 or E1R2 MFC depending on the territory. The dual version is only supported on the IP412 and in slot A of the IP406 V2.
Details of the supported ISDN supplementary services and protocols for each PRI are given in the 'Public and Private Voice Networks' section.
T1 trunk cards incorporate an integrated CSU/DSU. The CSU function allows the trunk to be put in loop-back mode for testing purposes. This can be set manually, using the monitor application, or automatically from a Central Office sending a Line Loop Back (LLB) pattern. The DSU function allows the T1 trunk to be shared between data and voice services.
IP400 Office Universal Quad Analog Trunk (LS) Card
This card provides four analog trunk ports. These are 2-wire loop start interfaces and are available in all territories. This card supports Caller ID where provided. With IP Office R3.1 and later, this module supports optional 16ms echo cancellation.
Please note that ground start analog trunks are supported via the IP Office Analog Trunk 16 Expansion Module.
IP400 Office Voice Compression Module - 4/8/16/24/30 ports
The Voice Compression Module (VCM) is used for Voice over IP (VoIP) applications in the IP406 and IP412 control units. Five VCM variants are available supporting 4, 8, 16, 24 and 30 channels of compression. The echo cancellation capabilities of the VCM cards vary. The VCM 4, 8, 16 and 24 offer 64ms of echo cancellation while the VCM 30 offers 25ms.
On IP Office - Small Office Edition systems, either 3 or 16 VCM channels are built-in and cannot be changed. The IP406 supports a single VCM while the IP412 can have any two VCM's installed.
IP400 Internal Modem Card
An internal modem card with 2 or 12 modems can be installed in both the IP406 and IP412 to provide dial-up capacity that is better matched to remote access requirements of customers. The Internal Modem card allows up to 12 simultaneous V.90 (56kbps) analog modem calls into the IP Office.
IP400 Office Phone Module
This module provides additional analog telephone interfaces:
- Two Wire
- DTMF signaling (No rotary or Loop Disconnect)
- Time Break Recall (No Earth Loop Recall)
- Caller ID capable
- Message Waiting Indication (MWI) capable - High Voltage, Pulsed High Voltage, Line Reversal
The IP400 Office Phone module is available in 3 versions, giving 8, 16 or 30 extensions. Telephones can be located up to 1km from the control unit. For extensions located "out-of-the-building" additional line protection will be needed.
IP Office Digital Station V2 Module
This expansion module provides additional Digital Station (DS) ports for selected Avaya 2400, 4400, 5400, 6400, T3 (EMEA only) series phones and 3810 wireless phones (NA only). The IP400 Office Digital Station module is available in 2 variants; 16 or 30 extensions.
IP400 Office So8 Module
The IP400 Office So8 module provides 8 S-Bus interfaces for Basic Rate ISDN devices, such as video conferencing, fax servers or ISDN telephones.
IP400 Office WAN3 10/100
The IP400 Office WAN3 10/100 module provides three WAN connections (X21, V35 or V24 via a 37way D Type socket and using an appropriate connector cable). Data rates of up to 2 Mbps are supported on each interface, the carrier providing the line dictates the actual operating speed i.e. in some territories the maximum speed may be limited to 1.544 Mbps. These WAN interfaces are identical to the single WAN connection provided as standard on the IP406 and IP412 platforms.
The IP400 Office WAN3 10/100 connects to the control unit through the Local Area Network via a 10/100Mbps connection and does not use an expansion port on the control unit. Small Office Edition and IP Office 500 do not support the WAN3 10/100. All other platforms support up to two WAN3 10/100 modules.
IP400 Office Analog Trunk 16
This expansion module provides an additional sixteen Loop Start or Ground Start two-wire analog trunks. (Ground start trunks are not available in all territories) The first two trunks on the module which are automatically switched to power fail sockets on the rear of the unit in the event of power being interrupted must be loop start for correct power fail operation.
IP400 Digital Station 16 V1
Provides Digital Station (DS) ports supporting 24xx, 44xx, 54xx and 64xx Series phones plus 3810 and 9040 phones. The IP400 Office Digital Station module is available in 2 versions; 16 or 30 extensions. Terminals can be located up to 1km from the unit using CAT5 cabling.
IP 400 Digital Terminal Module
Provides Digital Terminal (DT) ports for Avaya 20 series digital terminals (2010, 2030, 2050, 20DS and 20CC phones). The IP Office 412 Digital Terminal module is available in 2 versions; 16 or 30 extensions. Terminals can be located up to 1km from the unit using CAT5 cabling
IP401 WAN Expansion
The IP401 WAN Expansion card provides a single WAN connection (X21, V35 or V24 via a 37way D Type socket).
Line speeds up to and including 2Mbps are supported on the interface. The carrier providing the line dictates the
actual operating speed, i.e. in some territories the maximum speed may be 1.544M.